Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These spindles have reconditioned king pins and are ready to bolt back on. They do NOT come with link pins, so look at yours to see if you need new ones. Most of the time you do not need new ones as they are a bearing and not a bushing. Due to the core shortage on these spindles you will need to send us your old ones first.
These spindles have reconditioned king pins and are ready to bolt back on. They are sold in pairs (on an exchange basis) and they come with instructions on how to pull them off and put them back on. To check yours jack up the front of the car. Grab the top and bottom of the tire and rock it back and forth. If you see or feel movement then they are worn. On Bus spindles they only come with the king pins reconditioned. The reason for that is most of the time your link pins are good. On Bugs they come with both king pins and link pins reconditioned.
All steering box cores must be sent first, before we can send you a rebuilt one. Our stock on these are so low that we cannot chance people not sending cores back. Your box must be and “F” box for 68-72 or a “ZE” or “ATE” box for 55-67. We cannot use any other cores, so please check that you have a rebuildable box before sending.
For all other cores, you have two options. You can send in your core first to avoid having to pay the core fee up front when ordering, or, you can pay the core charge and when we get your core in we will credit you back. You can choose to have it refunded to your card or you can have it put as credit on your account toward future purchases. When sending your core to us, please include your full name and telephone number.. You may choose to have your specific item rebuilt and sent back to you, but that must be made apparent when you send in your core.
We will call you after we have received and reviewed your cores. Most of the cores we receive are rebuildable, however, there are a few that are not able to be rebuilt. We will let you know when we call you whether yours are rebuildable or not, and figure out the next step.
Some reasons why your item might not be accepted:
Steering Boxes:
- Bent steering shaft 55-62
- Completely rusted, won’t turn
- Peg & worm destroyed
Spindles:
- Worn out king pin housing
- Bent spindle
- Spindle threads hammered, cut, or modified
Ball Joints:
- Bent
- Bearing surface pitted/destroyed
IRS:
- Bearing surface too bent, modified, broken.
There may be an additional fee if your item is damaged, yet salvageable/repairable.
Steering boxes that are not usable will be sent back and you will need to find another usable core before you can purchase a rebuilt box.
Bus (Type 2): 64-67
No customer reviews for the moment.
Part #: 6501331W
CV Boot Torque Plate (3 per Boot) for 930
Application:Part #: 211615108A
Front calipers hold the brake pads that stop the rotor, which in turn stops your vehicle. If you are ordering this without sending your core in first you will need to order the core as well. The core charge will be refunded when we get your core back and it is rebuildable.
Application:Part #: GR11X
Generators supply the battery with voltage.
Application:Part #: 151871415
Main Bow Top Seal to Body, Left
Application:Part #: 151867503
This is the vinyl covering for the inside roof and sides of the Bug.
Application:Part #: 143847327
Front Upright Quarter Window Seals, Pair
Application:Part #: 111857233A
Radio Block off Plate, without chrome strip and clips
Application:Part #: 113255737
Pre-Heat Tube Clip, 2 Required
Application:Part #: 211707002AM
Complete Rear Bumper assembly MINUS mounting brackets, bare steel
Application:Part #: 1115457RD
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Red
Application:Part #: JC21040
Jaycee Mag-Plate, 6 Bolt, Silver
Application:Part #: 211801051HL
This area tends to rust.
Application:Part #: 211867515
Roof Lining, Gray, Original texture and style, Set of 2
Application:Part #: 113501283
If a rear axle bearing is bad, you will have excessive play in the rear wheel.
Application:Part #: 241853579K
Body Molding End Cap Kit, finishes the ends of the early Deluxe Bus Body Molding, 14 piece kit
Application:
These spindles have reconditioned king pins and are ready to bolt back on. They do NOT come with link pins, so look at yours to see if you need new ones. Most of the time you do not need new ones as they are a bearing and not a bushing. Due to the core shortage on these spindles you will need to send us your old ones first.