Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This hydraulic cylinder feeds all the wheel cylinders.
This hydraulic cylinder feeds all the wheel cylinders. After installing a new one make sure the rod that pushes the plunger is adjusted correctly. When adjusting it you can't see the measurement but you can feel it. The rod should have about an 1/8" of free play before it starts pushing. If it's too tight it will not allow the fluid to travel back to the reservoir locking up the brakes usually in the middle of an intersection.
Bus (Type 2): 70
No customer reviews for the moment.
Part #: 211611817A
This is the grommet for the reservoir line(s) where they go into the master cylinder.
Application:Part #: 281611349
This cap sits on the top of the brake fluid reservoir filler hole.
Application:Part #: 113611195
This boot is on the plunger end of the master cylinder, keeping dirt out of the master cylinder..
Application:Part #: 211611313G
This reservoir is for a 68-72 Bus. The reservoir holds the brake fluid for the brake master cylinder.
Application:Part #: 211611309
Brake Fluid Reservoir, includes cap
Application:Part #: 211611833C
Brake Line Grommet (2 per bus)
Application:Part #: 1903183
This aftermarket chrome cap nut and spacer hold the alternator/generator pulley on.
Application:Part #: 361827725
Lower Inside Rear Hatch Seal, Squareback
Application:Part #: 251807311D
Chrome Rear Bumper for Vanagons
Application:Part #: 1827329
This spring replaces the stock spring you might have thrown away when you put the deck lid stand offs on.
Application:Part #: 111105719A
Rod Bearings .30
Application:Part #: 1129610EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 688110
Lowback Roadster Style Seats, Black Vinyl
Application:Part #: 251419811
These are the ball joints on the tie rods.
Application:Part #: 211703120AX
This is where you would put in the stock jack to jack up the bus.
Application:Part #: 221885805
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 211721555D
This cable operates the carburetor(s).
Application:Part #: 111298101A
This kit contains a barrel bolt and bracket that hook to the control levers.
Application:Part #: 113501283
If a rear axle bearing is bad, you will have excessive play in the rear wheel.
Application:Part #: 111707336B
These brackets hold the bumpers on.
Application:Part #: 211611711B
Brake Line Master Cylinder to "T" Front
Application:Part #: 1101026AL94
Aluminum "Super Case" for 94mm Bore
Application:
This hydraulic cylinder feeds all the wheel cylinders.