Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This seal goes between the arm and the spindle on buses with king and link pin front ends.
This seal goes between the arm and the spindle on buses with king and link pin front ends. It's a good idea to replace them when redoing the spindles. You will need 4 of them.
Bus (Type 2): -67
No customer reviews for the moment.
Part #: 022101361C
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 113301189F
These are the seals that go around the final drives on an IRS transmission.
Application:Part #: 133957809A
This cable goes from the speedo to the driver side front wheel.
Application:Part #: 113857513K
This is a replacement mount for oval mirrors.
Application:Part #: 211201075M
Fuel Tank. This tank can be used with non fuel injected busses, you just need to plug the injection return line.
Application:Part #: 251845521CA
This seal is for the rear window.
Application:Part #: 113853505G
This is the front strip that goes down the front hood.
Application:Part #: 211801351A
Cargo Floor Cross Member, 1 per bus
Application:Part #: 6129605
This is the best air cleaner for those of you playing in wet and muddy off-road areas.
Application:Part #: 6801101
These tabs are used for mounting just about anything to tubing..
Application:Part #: 6711150A
This box is made so you can weld it to a piece of 1 1/2" tubing and mount it to your shifter.
Application:Part #: 111955993
These are the rest of the little parts for the wiper shafts or wiper related parts..
Application:Part #: 111721555C
This cable operates the carburetor(s).
Application:Part #: 111857706TN
It's the law and a good idea to have seat belts.
Application:Part #: 71016
This filter goes in line with the fuel line, keeping dirt or rust out of the carburetor.
Application:Part #: 1517289
These seals fit into the CV joint flange to keep the axle from beating the transmission cup and to keep the transmission oil out of the CV joint.
Application:
This seal goes between the arm and the spindle on buses with king and link pin front ends.
