Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
If you're rebuilding your own heads, you will probably need guides.
If you're rebuilding your own heads, you will probably need guides. Oversize guides refer to the outer diameter. Note: When installing, heat the head and freeze the guide; they will go in easier. We advise you not to try this yourself unless you have experience in replacing guides.
No customer reviews for the moment.
Part #: 1198094C
94mm Mahle Barrels
Application:Part #: 315198163A
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 1198160
These rings are cast iron.
Application:Part #: 1198163ATS
94mm Piston Rings Total Seal
Application:Part #: 1101353
Whether your motor lives or not can depend upon this little shim.
Application:Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1107434
Not our favorite type of piston pin keeps.
Application:Part #: N110085
Some of the more common nuts you might need..
Application:Part #: 11310140108
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 1101476
These are great valve covers.
Application:Part #: 1101382
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 311198069FM
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers. MAHLE
Application:Part #: 1101374
40 HP Barrel Shims .040 (4)
Application:Part #: 1101482
These covers look good but have a tendency to leak.
Application:Part #: 311198169B92
Piston Ring Set 92mm
Application:Part #: 113101355A
New dual port head
Application:
If you're rebuilding your own heads, you will probably need guides.
