Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This is the handle on the front hood.
This is the handle on the front hood. To remove the handle, open the hood and locate the two bolts holding the latch mechanism in. These also hold the handle on. Remove them and the handle will fall off.
No customer reviews for the moment.
Part #: 311109601
The two inside valves in the head are the intake valves, which let the gas into the combustion chamber.
Application:Part #: 113201179A
Filler Hose Breather, T Piece
Application:Part #: 1109401125
Rocker Arms, High Ratio 1.25, w/Bushing, Set
Application:Part #: 021105401RC
Re-conditioned Piston Rods for 1700-1800cc engines.
Application:Part #: 1301147
Solid Trans Mid Mount
Application:Part #: 211857641B
Also known as the "oh shit" handle.
Application:Part #: 113847133A
These seals are for the side popout windows.
Application:Part #: 001301209A
Nose Cone Seal Holder
Application:Part #: 1511228
This cap goes over the torsion bar end of the spring plate holding the grommet.
Application:Part #: 6721562
Throttle Cable Extender for Morse and EMPI cables (10-32 thread) 8" cut to length
Application:Part #: 361845321ACL
These are the seals for the side of a Type 3.
Application:Part #: 1101442
This is a shim that is used between the head and barrel.
Application:Part #: 211501317
This seal keeps the grease in the bearings on IRS busses.
Application:Part #: 1501541
These control arm bushings on IRS control arms are a good way to stiffen up the flex that goes into the arms.
Application:Part #: 211867549C
Headliner Bow, 57.75" long
Application:Part #: 113415670
Horn Button Kit
Application: