Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These straps are a good idea if you have a car with a big engine. We highly recomend that you use these in conjunction with the urethane transmission mounts.
These straps are a good idea if you have a car with a big engine.The rear strap keeps the bell housing from twisting and the front strap keeps the nose of the transmission from breaking the front mount. We highly recomend that you use these in conjunction with the urethane transmission mounts. The straps that we carry are rubber insulated, which allow slight movement in the transmission in order to keep mounts and horns from breaking.
Bug (Type 1): 58-79
Type 3: 64-68
Ghia: 58-74
Thing: 73-74
Race/Off-Road: All
No customer reviews for the moment.
Part #: 311301265BFA
Transmission mount, Front
Application:Part #: 111398005A
This kit contains all of the gaskets needed to rebuild a transmission.
Application:Part #: 1311321
These heavy duty gear keys are rated at twice the strength of stock keys.
Application:Part #: 1517122
These diffs add two more spider gears to your differential, plus the housing is way stronger then stock.
Application:Part #: 113301155
This is the bushing between the bellhousing of the transmission and the starter.
Application:Part #: 001301207
Nose Cone Bushing, Rear, Late
Application:Part #: 6501141
These retainers help stiffen the plates that bolts the tubes to the trans.
Application:Part #: 113301263FA
Rear Transmission Mount, Left or Right good quality sold each
Application:Part #: 113301229A
This is the front of the transmission that houses the shift lever.
Application:Part #: 111398003
Transmission gasket set.
Application:Bug (Type 1); -60
Bus (Type 2); -59
Ghia; -60
Part #: 1301184
This heavy duty side plate keeps the ring and pinion where it's supposed to be.
Application:Part #: 113311541C
Transmission Shift Lever (Hockey Stick)
Application:Part #: 211301297
Front Transmission Mount
Application:Part #: 211301265A
These rubber mounts hold the transmission in place.
Application:Part #: 113517289A
These are the seals that go around the final drives on an IRS transmission.
Application:Part #: 1301263
These mounts made of urethane never wear-out.
Application:
These straps are a good idea if you have a car with a big engine. We highly recomend that you use these in conjunction with the urethane transmission mounts.
