Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
There are two types of hold downs, rubber and steel.
There are two types of hold downs, rubber and steel. We prefer the steel ones over the rubber, because rubber ones don't last as long.
No customer reviews for the moment.
Part #: 071198009
This kit contains most of the seals and gaskets necessary to rebuild an engine.
Application:Part #: 2080123
This overhead fiberglass gauge housing is designed to fit all busses 1955-1967.
Application:Part #: 153863011
These are the interior panels.
Application:Part #: 6501243
These spacers for the IRS stub axles are much stronger than the stock.
Application:Part #: 1251261C
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Application:Part #: 111941195
This chrome screw holds the head light bucket on.
Application:Part #: 1411300BN
Narrowed Sway Bar for Narrowed, Adjustable Front Beam, Ball Joint
Application:Part #: 311201179A
Gas Tank, Overflow Tube
Application:Part #: 1127103ALM
This is stainless steel braided fuel line.
Application:Part #: 1711104
The aftermarket shifters listed here, shorten the shift pattern considerably.
Application:Part #: 1109624
These springs are made for high RPM engines.
Application:Part #: 111823509B
The hood catch is what the pin of the hood latch goes into.
Application:Part #: 113853329
Outside Scraper Clip
Application:Part #: 151871100A
Convertible Top Frame Butt Plates
Application:Part #: 61296144RD
IDF air cleaner shield
Application:Offroad; All
Part #: 1711107
The aftermarket shifters listed here, shorten the shift pattern considerably.
Application:
There are two types of hold downs, rubber and steel.