Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:The aftermarket shifters listed here, shorten the shift pattern considerably.
The aftermarket shifters listed here, shorten the shift pattern considerably. This gives you a sensation of performance and it gets rid of that sloppy feel of the stock unit. All shifters have reverse lockout.
Bug (Type 1): -67
Type 3: -67
Ghia: All
Race/Off-Road: -67
No customer reviews for the moment.
Part #: 211955326D
Wiper Linkage, RIGHT
Application:Part #: 1101447
Copper Cylinder Head Shims 94mm bore .050 (4)
Application:Part #: N142761
Bus Steering Column Bracket to parcel tray Mounting screw, 2 required
Application:Part #: 021198175A
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 211801051JR
This area tends to rust.
Application:Part #: 141881376
This is the padding that sits on top of the springs of the seat.
Application:Part #: N114801
Check Strap Cleat Screws, Set of 2
Application:Part #: 211105271CRC
These flywheels have been reconditioned and are sold on an exchange basis. This is a rare flywheel so I do not have any in stock. You will need to send in yours first and we can recondition it.
Application:Part #: 111881360
Sisel Padding, 28" x 6' per sheet.
Application:Part #: 241898002
These polished replacement kits are designed to fit the original contour molding profile.
Application:Part #: 1105255BK
This is a very nice pulley; the numbers are etched in and do not wear off.
Application:Part #: 211813355A
Rear Corner to Beltline, Left
Application:Part #: 1707135ABK
This is one of the original bumper options that was used on the first Cal-Look Bugs back in the 70's.
Application:Part #: 028129087A
The heater hose goes from the fan shroud to the heater boxes.
Application:Part #: 113109623C
These springs return the valves back to their seats.
Application:Part #: 1413001
KYB's are the best selling monotube replacement shock in the U.S.A..
Application: