Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the lens and seal for the light that shines on the license plate.
This is the lens and seal for the light that shines on the license plate. They are held in by two small Phillips screws.
Ghia: 56-74
No customer reviews for the moment.
Part #: 111721231A
Brake Pedal Stop Plate
Application:Part #: 1501606CH
EMPI wheel adapters 4-130 to 5-205, 9.5mm Thick
Application:Part #: 111971235A
This is the strap that goes from the negative post of the battery to the pan of the car.
Application:Part #: 1601068B
EMPI Cosmo, Black w/ Polished Lip, 4x130, 5.5"x15"
Application:Part #: 117877209A
These are all of the parts that we can get our hands on for metal sunroof bugs.
Application:Part #: 211941323
This is the replacement lens and seal for the backup lights.
Application:Part #: 1115139
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 6615104B
Front Rotor for Disc brake setup, 5/205 bolt pattern, 12x1.5mm threads 1966-
Application:Part #: 111801171C
The heater channel carries heat form the heater boxes to the front of the car.
Application:Part #: 2129510
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 113721219A
Brake Pedal Pushrod Pin
Application:Part #: 211845101E
These are cut from safety glass as required by law.
Application:Part #: 221845343CAM
These window seals are on buses 1968 on.
Application:Part #: 151845521DAM
This seal is for the rear window. This is for a CONVERTIBLE ONLY.
Application:Part #: 211201131D
Fuel Filler Retaining Ring
Application:Part #: 1109336
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
Application:
This is the lens and seal for the light that shines on the license plate.