Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Whether your motor lives or not can depend upon this little shim.
Whether your motor lives or not can depend upon this little shim. Many people tend to overlook this part, but the shim controls the compression ratio. Compression equals heat and heat destroys motors. Take the time to figure your compression ratio and get the proper shims for that desired compression. Figuring compression ratios and getting the right shims is a long subject, so for help, just call. We find that 99.9% of all engines need barrel shims. Shims are sold in sets of 4.
Bus (Type 2): 1700-2000
No customer reviews for the moment.
Part #: 2101304
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 111198157BBB
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 111101401B02
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 1101374
40 HP Barrel Shims .040 (4)
Application:Part #: 029198175
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 1198160
These rings are cast iron.
Application:Part #: 113101481F
This gasket goes between the valve cover and the head.
Application:Part #: 1198161TS
90.5mm Piston Rings 1.5x2x4 Total Seal
Application:Part #: 315198163A
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 1101473OR
These covers look good but have a tendency to leak.
Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 2101301
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 311101353A
New single port head.
Application:Part #: 1101382
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101482EMP
This is the replacement mounting hardware kit for Channel Gasket Style Valve Covers.
Application:Part #: N110071
Some of the more common nuts you might need..
Application:
Whether your motor lives or not can depend upon this little shim.
