Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the only correct way to lower the front end of a Super Beetle.
This is the only correct way to lower the front end of a Super Beetle. There's no such thing as an adjuster for a Macphereson strut front end. You will need the lowered strut as well to go with these.
No customer reviews for the moment.
Part #: 1412031A
This is the only correct way to lower the front end of a Super Beetle.
Application:Part #: 1070275HDW
Replacement Hardware Kit for Bug Deck Lid Rack
Application:Part #: 135945191
This seal goes between the tail light housing and the body of the car..
Application:Part #: T1129306
This is a great way to get larger jets with out having to buy a lot of new jets.
Application:Part #: 251615124C
Front calipers hold the brake pads that stop the rotor, which in turn stops your vehicle.
Application:Part #: 1511227
This cap goes over the torsion bar end of the spring plate holding the grommet.
Application:Part #: 1601150
These are the most popular five lug mags wheels.
Application:Part #: 111707336B
These brackets hold the bumpers on.
Application:Part #: 1405671
These aluminum nuts are fashioned after the ball joint style nut.
Application:Part #: 311115107AHD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 211611070CCH
Front Right Wheel Cylinder (2 Required) CHINA
Application:Part #: 1405311A
Do you have a lowered beam now? They should have come with a kidney belt and a mouth guard.
Application:Part #: N115252
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1101146
These cheater studs replace the head studs that have pulled from the case.
Application:Part #: 211499131
Lock Plate, Axle Beam to Body, 8 Required
Application:Part #: 211405371BWG
These are reconditioned arms with new ball joints pressed in. They are sold on an exchange basis. If you would like to order these before sending your old arms in, please add part number 211405371WGC to your order. That is the core charge. Once you send back your old arms we will refund that amount, providing your arms are good.
Application:Part #: 111955407F
The arms extend from the shaft to hold the wiper blades, very rarely do they fail..
Application:
This is the only correct way to lower the front end of a Super Beetle.
