Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the rear lenses for the tail light, brake light and turn signal light.
These are the rear lenses for the tail light, brake light and turn signal light. They are held in place with two to three Phillips screws.
Bug (Type 1): 68-70
No customer reviews for the moment.
Part #: 111945192A
This seal goes between the tail light housing and the body of the car..
Application:Part #: 111945117A
This seal goes between the tail light housing and the body of the car..
Application:Part #: N441301
These are the rear lenses for the tail light, brake light and turn signal light.
Application:Part #: N141251
These are the rear lenses for the tail light, brake light and turn signal light.
Application:Part #: 111945185
Taillight/Turn Signal Screw
Application:Part #: 211845501F
Rear Window Glass for Rear Hatch
Application:Part #: 01006
These are the parts found in the distributor.
Application:Part #: 1127106ALM
This is stainless steel braided fuel line.
Application:Part #: 1601150NRC
Replacement Cap, Chrome with Logo
Application:Part #: 113867500
This is the vinyl covering for the inside roof and sides of the Bug.
Application:Part #: 111903181
Generator Pulley Nut
Application:Part #: 1251009
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 211707335D
Rear Bumper Bracket, Left
Application:Part #: 311943131
This is the lens and seal for the light that shines on the license plate.
Application:Part #: 211829221A
Rear Hatch Striker Plate
Application:Part #: 111707197A
These grommets go on the fenders or the body where the bumper brackets go through..
Application:Part #: 1611701E
Braided SS Brake Lines, 24", Pair
Application:Part #: 365853355
Rear Window Trim, includes Clips
Application:Part #: 1129199175
Needle Valve for 40/44 HPMX (EMPI), 40-48 IDF (Weber) 1.75mm
Application:Part #: 111498021
This is the pin that goes down through the spindle allowing the spindle to turn.
Application:
These are the rear lenses for the tail light, brake light and turn signal light.