Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This aluminum pedal is made to go over a roller pedal.
This aluminum pedal is made to go over a roller pedal. It works well if you don't like the feel of a roller on the bottom of your foot. The only bad thing it sits too close to the brake pedal, but this can be cured by trimming down the side of the pedal. Installation is real easy, just take out one of the pedal assembly bolts (one closest to you) and bolt the new pedal in, using the supplied bolt.
Bug (Type 1): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 211847571B
Front Safari Dash Tab Short
Application:Part #: 021115411a
Oil Pressure Relief Piston
Application:Part #: 6411107A
Thru Rod 8" Wider Beam, 48.75" Long, Boxed
Application:Part #: 113611735F
These are the metal brake lines found throughout the car.
Application:Part #: 211501221A
A very important nut to say the least.
Application:Part #: 111501131
This kit contains all of the gaskets needed to rebuild a transmission.
Application:Part #: 6501229BE
These are hardened aircraft quality CV joint bolts.
Application:Part #: 6857700
It's the law and besides you really do want a good set of seat belts if you going to be out playing..
Application:Part #: 1415802A
This is a great way to dress up the front end of your car.
Application:Part #: 111903181
Generator Pulley Nut
Application:Part #: N90305201
Intake Manifold Sleeve
Application:Part #: 141871030
This is the outer skin on your convertible.
Application:Part #: 7105401CU
We’ve teamed up with Neil & Parks to create a new Rod & Cap option for anyone running a Pauter “Big Block VW”. The Aluminum rod is made by MGP, and we are custom cutting the rod and cap to achieve a self-centering “cracking” application. These caps clear everything in a Pauter block.
Application:Part #: 111201551
Gas Cap, 100mm with Gasket
Application:Part #: 1127022RD
Billet Fuel Pump Block off, Red
Application:Part #: 113863107AGY
Rubber Firewall Mat, Gray
Application:
This aluminum pedal is made to go over a roller pedal.
