Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This kit has the correct nuts and washers to hold the heads on the engine..
This kit has the correct nuts and washers to hold the heads on the engine.
Bug (Type 1): 36hp-1600
Bus (Type 2): 36hp-1600
Type 3: 36hp-1600
Ghia: 36hp-1600
Thing: 36hp-1600
Race/Off-Road: 36hp-1600
No customer reviews for the moment.
Part #: 1198083
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 1198090ACH
90.5mm Pistons & Cylinders - 69mm Stroke CHINA
Application:Part #: 113101353ECO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 113101401
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 1101481
These are great valve covers gaskets.
Application:Part #: 1107432
Not our favorite type of piston pin keeps.
Application:Part #: 1101440
This is a shim that is used between the head and barrel.
Application:Part #: 1198163ATS
94mm Piston Rings Total Seal
Application:Part #: 1101352
.
Application:Part #: 113101481F
This gasket goes between the valve cover and the head.
Application:Part #: 1107430
There are two types of keepers we like to use.
Application:Part #: 1101384
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 11310140108
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 1198094B
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 1198163
These rings are cast iron.
Application:Part #: 1107434
Not our favorite type of piston pin keeps.
Application:
This kit has the correct nuts and washers to hold the heads on the engine..
