Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N109052
Screws for replacement pop out window frames. These screws are for joining the two Popout frame halves together
Application:These shoes or linings are in the rear drums and are new, so no exchange.
These shoes or linings are in the rear drums and are new, so no exchange. A set is four shoes; two per drum. Note: It is a good idea to purchase two new horse shoe clips and two new cotter pins as well.
No customer reviews for the moment.
Part #: 111885401
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 213837625
Vent Wing Seal, Left Front Door
Application:Part #: 111109611A
Exhaust Valve 36 HP
Application:Part #: 111945191B
This seal goes between the tail light housing and the body of the car..
Application:Part #: 111801177
Heater Channel Rubber Valve, 4 required, each
Application:Part #: 141012900
A broken one can give bad reception and a coat hanger isn't much better.
Application:Part #: 111201621C
Tank to Body Foam Seal
Application:Part #: 3251004
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 111837417C
Window Guide Channel
Application:Part #: 6707301U
Unassembled Single Tube Rear Bumper Shock Mount
Application:Part #: 01001
These are the parts found in the distributor.
Application:Part #: 1711144BR
These knobs come step threaded so they'll fit all stock 7,10, or 12mm shifters.
Application:Part #: 211798003C
Rear Bumper Bolt Kit
Application:Bus (Type 2); 73-79
Part #: 111405691
This is the cap that goes on the outside of the drum; covering up your bearing.
Application:Part #: 131415811
These are the ball joints on the tie rods.
Application: