Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the knobs for the wiper and light switches on the dash.
These are the knobs for the wiper and light switches on the dash. They just unscrew and screw back on. For Bugs 1968 and on, you will need the cap that goes in the knob as well.
Bug (Type 1): 53-66
Bus (Type 2): 55-67
Type 3: 62-67
Ghia: 56-61
Off-Road: -66
No customer reviews for the moment.
Part #: 151971110
Complete Wiring harness for 1956-57 Convertible
Application:Part #: 211711630C
Heater cables open the flaps in the heater boxes allowing heat into the car.
Application:Part #: 021101417A
Exhaust Valve Guide
Application:Part #: 131415812
These are the ball joints on the tie rods.
Application:Part #: 6823497
These fasteners take some time to put in, but they're worth the effort. Lightened Tab
Application:Part #: 113867501
This is the vinyl covering for the inside roof and sides of the Bug.
Application:Part #: 1707135APL
This is one of the original bumper options that was used on the first Cal-Look Bugs back in the 70's.
Application:Part #: 1115610BK
Billet Dipstick, Black
Application:Part #: 111721305C
This is the shaft that the clutch pedal attaches to.
Application:Part #: 113805591A
This is the front skin on the Bug.
Application:Part #: 1971226
We highly recomend using the positive termanial cover, as it can keep the termanial from hitting the rear seat spings and shorting out the battery.
Application:Part #: 1805052KIT
This tray mounts behind the rear seat.
Application:Part #: 111857131L
Locking Glove Box Latch w/keys
Application:Part #: 068251053D
This is the exhaust silencer.
Application:Part #: 6115467E
These are a nice unit and much better for off road cars than the cast aluminum breather box.
Application:Part #: 211857223A
Bare Metal Finish Radio Block off Plate
Application:
These are the knobs for the wiper and light switches on the dash.
