Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This oil pump cover comes with a threaded boss.
This oil pump cover comes with a threaded boss. You will need to plug the outlet side of the oil pump, which will force the oil out the cover. From this cover, the oil is routed to a filter then to a cooler and back into the case. The case must be full flowed, in other words, machined for the return line. This is the optimal way to run an external cooler, while maintaining the stock cooler. We recommend using this cover with a System One oil filter and the Mesa 72 plate oil cooler. You should also use the stock 1971 on doghouse internal oil cooler. All covers are for 8mm studed oil pumps.
Bug (Type 1): T1,All
Bus (Type 2): T2,All
Type 3: T3,ALL
Ghia: KG All
Thing: All
Offroad/Race:All
No customer reviews for the moment.
Part #: 043115531A
Oil Filler with Cap
Application:Part #: 1115450PL
The oil filler extension screws into the generator stand and comes with a fitting to vent the crankcase.
Application:Part #: 1117012
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
Application:Part #: 111115487
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 1117101
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: JC22210
Jaycee Billet Oil Cap with Breater #8 AN Fitting, Red
Application:Part #: JC22960
Jaycee Billet Full Flow Pump Cover w/ -8 O-ring Fitting, Blue
Application:Part #: 1117107
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117105ALM
These fittings are used for the stainless steel hose.
Application:Part #: 111115107B
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: N115244
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1117024FAN
This is the same as the mesa cooler but with a fan mounted to it.
Application:Part #: JC21020
Jaycee Mag-Plate, 6 Bolt, Black
Application:Part #: 113115175
This screen fits in the sump around the pick up tube.
Application:Part #: 1115106A
This is a great way to increase the oil capacity of your engine.
Application:Part #: N110062
Some of the more common nuts you might need..
Application:
This oil pump cover comes with a threaded boss.
