Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
On Bugs up to 1967 and on Buses up to 1963 you will need to push back the small plastic bezel.
On Bugs up to 1967 and on Buses up to 1963 you will need to push back the small plastic bezel. You will see a pin coming in from the side. Use a small punch or a nail with the head removed to drive the pin out. We suggest you do this in a clean area because the pin usually flies out and you will want to be able to find it. Once the pin is out, wiggle the handle and it will come off. On 1968 and later cars, you will need to pry out the plastic cover that is over the handle. Behind it you will need to remove the phillips screw. The handles that fit the Vanagon (#321 837 581) will work on the 68 and later Bugs, Buses and Type 3's and are a heavier duty than the stock one.
Bug (Type 1): 46-66
Ghia: -66
Race/Off-Road: 46-66
No customer reviews for the moment.
Part #: 6881399BVBV
These are the real deal.
Application:Part #: 211415801F
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:Part #: 111971905
This grommet goes around the main battery cable that goes to the starter.
Application:Part #: 153863705
This is a full carpet kit.
Application:Part #: 6513005
Limit Strap Clevis (Pair)
Application:Part #: 113885583
These are the parts needed to hold the back of the rear seat up.
Application:Part #: F1003
Permatex Form A Gasket
Application:Part #: ECP11B
ECP part numbers are for the regular crimp style electrical ends.
Application:Part #: 6823565
There are two types of hold downs, rubber and steel.
Application:Part #: JC86240
Jaycee Billet Sand Seal Pulley Hub
Application:Part #: 021109349B
These are the seals that go around the push rod tubes.
Application:Part #: N110062
Some of the more common nuts you might need..
Application:Part #: 113129031K
This is what delivers gas and air to the engine.
Application:Part #: 141707181
Front/Rear Bumper Overrider Base Seal
Application:Part #: 133971019
The electrical harness runs everything on the car.
Application:Part #: 251807124A
these plastic caps mount on the ends of the later year bumpers..
Application:
On Bugs up to 1967 and on Buses up to 1963 you will need to push back the small plastic bezel.
