Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The striker is what keeps the door closed, an absolute necessary part to say the least.
The striker is what keeps the door closed, an absolute necessary part to say the least. They are held in place by large screws. We suggest you use an impact drive to get the striker out. Note: Use masking tape to mark two sides of the old striker, so you will know where to set the new one. Before you completely tighten down the new striker, close the door and see how it lines up. If it lines up, tighten the screws. If it doesn't, start making adjustments until it does.
Bug (Type 1): 60-66
Race/Off-Road: 60-66
No customer reviews for the moment.
Part #: 112711155
This is a replacement shift rod.
Application:Part #: 113611810
Master cylinder fitting with gromment
Application:Part #: 115875563
Sunroof inner Clamp Plate
Application:Part #: 241853341
Angled Window Molding Clip
Application:Part #: 311198069MF
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers. MAHLE FORGED
Application:Part #: 111943023B
This housing mounts on the deck lid to hold the light assembly for the license plate.
Application:Part #: 113721002
Pedal Assembly Bushing Kit
Application:Part #: 211201075L
Fuel Tank For Carbureted Applications only. At this point in time we can not get this tank and we are using the 211201075M fuel injection take and just plugging off the return line.
Application:Part #: 6881410ABK
These seats are better than the fiberglass, but still no where near as good as beard seats.
Application:Part #: 113953051K
Turn Signal Bulb Holder, Each
Application:Part #: 1251005CC
Single Quiet Muffler (Ceramic Coated) Bug (type 1): All Ghia: All
Application:Part #: 211945363A
This is the lens that you see on the side of the bus in the front and the rear.
Application:Part #: 111251241A
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 1401021DL
This is a brand new axle beam with adjusters already installed.
Application:Part #: 1501620
Aluminum Wheel Spacer 3/8" thick 5x205 bolt pattern. Sold in pairs
Application:Part #: 111941185A
Headlight Wiring Conduit, rubber, Set of 2
Application:
The striker is what keeps the door closed, an absolute necessary part to say the least.