Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Weld in Front Beam Adjuster for Type 2 Applications
Weld in Front Beam Adjuster for Type 2 Applications. 2 required per beam Brazing/copper welding is required for installation.
Bus (Type 2): All
No customer reviews for the moment.
Part #: 1401023
Longer bolts for the front end
Application:Part #: 113109612A
The two outside valves in the head are the exhaust valves, they let the burned fuel out of the head.
Application:Part #: 02007
These are the parts found in the distributor.
Application:Part #: 211801071A
A panel that is right behind the front tire.
Application:Part #: 211837225CH
Front Inside Door Handle Chrome w/o hole
Application:Bus (Type 2); 60-63
Part #: 111819945
Heater Hose to Body Seal
Application:Part #: 6823564
There are two types of hold downs, rubber and steel.
Application:Part #: 211867615A
These are the clips and boots that hold on the door panels.
Application:Part #: 133971020
The electrical harness runs everything on the car.
Application:Part #: 261813164M
This is what the battery sits on.
Application:Part #: 6251205
2 Bolt Header Gaskets (Pair)
Application:Part #: 241863711E
This rubber mat goes on the front floor.
Application:Part #: 211611725
These are the metal brake lines found throughout the car.
Application:Part #: 211843371A
Sliding Door Hinge Operating Cam
Application:Part #: 025198461
The crankshaft rides in the main bearing.
Application:
Weld in Front Beam Adjuster for Type 2 Applications
