Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
ECP part numbers are for the regular crimp style electrical ends.
ECP part numbers are for the regular crimp style electrical ends. ECX part numbers are the factory style ends. You will need a special pair of pliers (see ELECTRICAL END PLIERS in TOOL SECTION) to install ECX ends. The ECX are better than the regular crimp ends.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 143845321A
Non Pop-Out Quarter Window Seals
Application:Part #: 6857637
Weld on Dash Grab Handle. Chrome Finish
Application:Part #: 211298009A
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 153863710
This is a full carpet kit.
Application:Part #: 111953051A
Front Turn Signal Bulb Holder, Fits both sides
Application:Part #: 1905250
This chrome clamp holds the distributor in time, as well as holding it onto the case.
Application:Part #: 1955400
This windhield washer kit has a 12v motor and all mounting hardware and wiring is included..
Application:Part #: 1702001
This bar kit keeps the transmission forks from flexing when you burn out.
Application:Part #: 1837433
This kit comes with everthing you need to eliminate your vent window, tempered glass, felt window channels, inner and outer snap in scrappers.
Application:Part #: 1119352BK
These three pieces of tin go from the heater boxes to the case.
Application:Part #: 62010718C5
Spun aluminum gas tanks for Buggies, come with either end fill or center fill option.
Application:Part #: 111721365
The clutch cable boot goes over the end of the bowden tube where the cable moves in and out.
Application:Part #: 151845121FAM
This seal goes around the front window.
Application:Part #: 221883419
Middle Seat Floor Mount Reinforcement Plate, Welds onto floor and supplies support for mount
Application:Part #: 1813110
This polished stainless steel firewall dresses up your engine compartment.
Application:Part #: 1615107A
Replacement Front Brake Bracket for Kit # 6615100 & 1615100G, Each
Application:
ECP part numbers are for the regular crimp style electrical ends.