Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:These are some of the most common jets used. Sold individually. .150
These are some of the most common jets used. We'll be happy to help you with your jetting, but we'll need to know some details. So before you call us, get some information ready about your engine, like size, compression ratio, etc. Sold individually.
No customer reviews for the moment.
Part #: 113129034KIT
This adapter is used when you want to put a 30PICT carb on a dual port manifold. Will only work with a round bowl style carb. It will NOT work with a square bowl carb.
Application:Part #: 1129310
Empi Idle Jet Vent Tube Kit
Application:Part #: 1129034
We have found this kit to be a good, cheap dual carb kit for a stock motor.
Application:Part #: 112950508IDA
Auxiliary Venturi
Application:Part #: 1129505011
These are some of the most common jets used.
Application:Part #: 1129505
Empi 40/44/48 IDF & HMPX Extended Emulsion Tube Holder
Application:Part #: 112950501IDF
Mixture Screw for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:Part #: 1129510A
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 1129516
Empi Hex Bar Linkage Bearing Conversion Kit
Application:Part #: 112950506IDF
Throttle Shaft Nut for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:Part #: 1129305040
These are some of the most common jets used. Sold in pairs.
Application:Part #: 112950502IDA
Stack Hold Down Screw and Washer
Application:Part #: 1129199055
Accelerator Pump Jets for 40/44 HPMX (EMPI), 40-48 IDF (Weber) 0.55
Application:Part #: 1129513
We have found this kit to be a good, cheap dual carb kit for a stock motor.
Application:Part #: 112950502IDF
Mixture Screw Spring for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:Part #: 113129323B
Here are some of the replacement parts for your stock carburetor.
Application: