Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:ECP part numbers are for the regular crimp style electrical ends.
ECP part numbers are for the regular crimp style electrical ends. ECX part numbers are the factory style ends. You will need a special pair of pliers (see ELECTRICAL END PLIERS in TOOL SECTION) to install ECX ends. The ECX are better than the regular crimp ends.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 151867501
This is the vinyl covering for the inside roof and sides of the Bug.
Application:Part #: 211703135
Outrigger, fits Left Rear
Application:Part #: 1109616
Single Spring Shims, .030" 8 piece
Application:Part #: 111941072
These lights came stock on a 1967 Bug.
Application:Part #: 261841829
This is the seal around the third door of a double cab.
Application:Part #: 1881041
We really like the style and comfort that these seats provide.
Application:Part #: T1129028
Some carb combo's are tricky to sync, like kadrons that have a stud sticking up.
Application:Part #: JC22230
Jaycee Billet Oil Cap with Breater -8 AN Fitting, Blue
Application:Part #: 111405129
These seals go around the arms to keep the dirt out of the front beam.
Application:Part #: 211498101A
The main reason to replace these clamps is because you've destroyed the old ones getting them off.
Application:Part #: 1598021RD
These boots are great for your swing axle because they last longer than stock boots.
Application:Part #: 131405667
Spindle Nut, Right
Application:Part #: 111881374
This is the padding that sits on top of the springs of the seat.
Application:Part #: 111115485
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 113501329
C.V. Boot Torque Plate
Application:Part #: N108661
Turn Signal Screws Set of 4
Application: