Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a shim that is used between the head and barrel.
This is a shim that is used between the head and barrel. We suggest you only run these on a friday saturday night car. We feel if you plan on putting a lot of miles on your motor the expansion characteristics will cause the heads to come loose after many miles. Now for drag cars and the friday saturday night car they are great. Make sure you take in consideration the thickness for your compression ratio.
Bug (Type 1): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 1101381
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 111198057A
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers.
Application:Part #: 311101353ACO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 1198160B
These rings are cast iron.
Application:Part #: 1198092A
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 311198169A
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 1101469
If you have high compression you will need to vent the valve covers into a breather box. Deluxe Vents have barbed end for the hose connection.
Application:Part #: 1198161
These rings are cast iron.
Application:Part #: 111198157B
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 311198169B92
Piston Ring Set 92mm
Application:Part #: N154011
These nuts and washers hold the heads on.
Application:Part #: 1101392
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1198159B
These rings are cast iron.
Application:Part #: 1198163ATS
94mm Piston Rings Total Seal
Application:Part #: 113101353BRB
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld). Due to a shortage of cores we will need your Cylinder head Cores before sending any Rebuilt heads.
Application:Part #: 1198162
These rings are cast iron.
Application:
This is a shim that is used between the head and barrel.
