Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This kit allows you to bolt disc brakes onto your Bug king and link pin or ball joint front end.
This kit allows you to bolt disc brakes onto your Bug king and link pin or ball joint front end. The kit comes with rotors, calipers, seals, lock tabs, and mounting bolts. Non lowered kits also come with front wheel bearings. If your Bug is a 66 or earlier, you'll need the master cylinder off a 1967 or later Bug. Also the reconditioned spindle kit is sold on an exchange basis. We do not recommend front disc brakes on off road cars, because you'll get in a lot of trouble in the dirt unless you have some kind of proportioning valve.
Bug (Type 1): -65
Ghia: 56-65
No customer reviews for the moment.
Part #: 113863012
These are the interior panels.
Application:Part #: 1711144BR
These knobs come step threaded so they'll fit all stock 7,10, or 12mm shifters.
Application:Part #: 311405371WG
These are reconditioned arms with new ball joints pressed in. They are sold on an exchange basis. We will not ship out your reconditioned Ball Joint Arms until we receive your old arms in good rebuildable condition.
Application:Part #: 111837341
Door Remote Anti-Rattle Pad
Application:Part #: 1101393
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 111198057
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers.
Application:Part #: 265845321
Double Cab Rear side Stationary window Seal w/Vent Wing Window
Application:Part #: 113847131BBK
This is the welt that goes around the rear popout windows.
Application:Part #: 1129729BKKIT
Dual Port Installation Kit utilizing Black Urethane Boots
Application:Part #: 113609209
Brake adjusting screw
Application:Part #: 113819717
Fresh Air Control Box Hose (Pair)
Application:Part #: 251813133B
Inside Engine Door Seal GERMAN
Application:Part #: 211611069C
This hydraulic slave cylinder is found in the front brake backing plate.
Application:Part #: 211945161
Front Side Reflector Base
Application:Part #: 2301150
This is a bolt on kit that reduces torsional stress felt at the front of the nose cone mount and rotational stress on the bell housing mounts.
Application:Bus (Type 2); 56-67
Part #: 1198035
If you are converting a single port engine to a dual port or if you have a brand new case; these are the head studs you're looking for.
Application: