Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This plug has three wires on it that plug into the headlamp.
This plug has three wires on it that plug into the headlamp. These are not as good as the factory ones, but they do work. Note: the brown wire is the ground wire. Make sure your ground is good or you will have a dim light.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
No customer reviews for the moment.
Part #: N14402140
Some of the most common studs you might need. Stud 8mm x 40mm
Application:Part #: 211201125D
Fuel Tank Filler Hose, Curved
Application:Part #: 6301267
Front Transmission Solid Mount with Hardware
Application:Part #: 111943191C
This is the lens and seal for the light that shines on the license plate.
Application:Part #: 224845341CCL
Side Window No Vent Wing, Center or Rear, Left or Right, Fixed or Sliding, Cal Look
Application:Part #: 211301289A
Nose Cone Boot
Application:Part #: 02007
These are the parts found in the distributor.
Application:Part #: ECP12Y
ECP part numbers are for the regular crimp style electrical ends.
Application:Part #: 211615108ACO
Front calipers hold the brake pads that stop the rotor, which in turn stops your vehicle.
Application:Part #: 1115181
A stock sump plate that has been chromed..
Application:Part #: 1411300C
These heavy duty sway bars help eliminate swaying.
Application:Part #: 144863705
This is a full carpet kit.
Application:Part #: 111953041MT
Weld on Mount for Bullet Turn Signal Assembly
Application:Part #: 211813355G
Rear Lower Corner, Left, 250mm (9.8") high
Application:Part #: 1129709
This pair of aluminum end castings are for use with a center section manifold.
Application:Part #: 6498051C
Link Pins for Multi-Shock Trailing Arms, Pair
Application:
This plug has three wires on it that plug into the headlamp.
