Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the bell shaped spacer that hold the outer half of the generator pulley on.
This is the bell shaped spacer that hold the outer half of the generator pulley on. For more info please read Generator Pulley Shims, its important.
Bug (Type 1): All
Bus (Type 2): All
Ghia (Type 4): All
Thing (Type 5): All
Race/Off-Road: All
No customer reviews for the moment.
Part #: SR11X
This is what starts the car.
Application:Part #: 113119031B
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
Application:Part #: N127051
This is the pulley on the generator that holds the belt.
Application:Part #: JC86020
Jaycee Billet Alternator Pulley, Red
Application:Part #: 113903141B
The generator strap goes around the generator and holds the generator to the stand..
Application:Part #: SR15NC
This is what starts the car.
Application:Part #: 111903137D
This is the belt that turns the generator.
Application:Part #: SR11XCO
This is what starts the car.
Application:Part #: GR11X
Generators supply the battery with voltage.
Application:Part #: 113903515
These are the bearings and brushes for your generator.
Application:Part #: 111903137B
This is the belt that turns the generator.
Application:Part #: SRHT6V
A 6volt gear that fits the high torque starter.
Application:Part #: GR15X
Generators supply the battery with voltage. Rebuilt + Core
Application:Part #: 111903131A
Probably the most common cause of generator pulleys coming apart is the shortage of shims.
Application:Part #: 111119131
Fan Hub Washer
Application:Part #: 111119141A
Cooling Fan Nut
Application:
This is the bell shaped spacer that hold the outer half of the generator pulley on.
