Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:If your stock bushings are worn out or you have an aluminum beam, we offer the following urethane bushings and replacements..
If your stock bushings are worn out or you have an aluminum beam, we offer the following urethane bushings and replacements.
Bug (Type 1): -65
Ghia: -65
Race/Off-Road: -65
No customer reviews for the moment.
Part #: 043131672
This is a smog device.
Application:Part #: 1881401CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 6501206IRS
These plates are .250" thick, that means they can handle the abuse of off roading.
Application:Part #: 113415821
These are the ball joints on the tie rods.
Application:Part #: 1898121
These window seals don't have the groove in them for the chrome trim, giving the car the Cal Look.
Application:Part #: 111115107AK
VW flat cam, 21mm, 8mm Stud Oil Pump
Application:Part #: 151863703
This is a full carpet kit.
Application:Part #: 1411298
Stainless Steel Clamps Only, Link pin/ Ball Joint
Application:Part #: 1845201B
This kit comes with everthing you need to eliminate your vent window, tempered glass, felt window channels, inner and outer snap in scrappers.
Application:Part #: N185161
These fittings fit on the front end so you can pump grease in the front suspension..
Application:Part #: 2251006
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector..
Application:Part #: 261813300
Truck Corner Louver Section
Application:Part #: 1127104ALM
This is stainless steel braided fuel line.
Application:Part #: 111831421DOS
These pins are in the door hinges. They are a real pain to get out, but we've found an air hammer works the best. Sometimes that doesn't even work, so have a case of penetrating oil on hand. It's better to repair the door hinges before you paint the car. The plug is a good idea to have as well, they easily plug into the top of the hinge pin.
Application: