Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These handles go on the inside of the front doors to open them.
These handles go on the inside of the front doors to open them. On bugs up to 1967 and on buses up to 1963 you will need to push back the small plastic bezel. You will see a pin coming in from the side. Use a small punch or a nail with the head removed to drive the pin out. We suggest you do this in a clean area because the pin usually flies out and you will want to be able to find it. Once the pin is out, wiggle the handle and it will come off. On 1968 and later cars, you will need to pry out the plastic cover inside the lever. Behind it you will need to remove the phillips screw. Then take the door panel off. There are two 10mm headed bolts that hold the latch on.
Bug (Type 1): 70-
No customer reviews for the moment.
Part #: 111971108
The electrical harness runs everything on the car.
Application:Part #: 6821509HD
These bars mount where your running boards where.
Application:Part #: 211837835
This seal goes on the top of the front door frames on buses 1950-1967.
Application:Part #: 211817517
Gutter above Front Left Door
Application:Part #: 133821021
These new front fenders are not as thick as the original German fenders.
Application:Part #: 211881404
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: N142892
8X16 Phillips head screw
Application:Part #: 211498211BWG
These spindles have reconditioned king pins and are ready to bolt back on. These spindles will give you the stock ride and give you that lowered stance. They are sold on an exchange basis and come with new king pins. They do NOT come with link pins, so look at yours to see if you need new ones. Most of the time you do not need new ones as they are a...
Application:Part #: 211801371A
A floor support section.
Application:Part #: 111298007
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 1601105
These are studs and nuts for different types of wheels.
Application:Part #: 211805039X
Lower Windshield Surround 175mm (7") Tall
Application:Part #: 281611349
This cap sits on the top of the brake fluid reservoir filler hole.
Application:Part #: 1601103A4
Screw in Wheel Studs M14-1.5 commonly found in 4x130 applications
Application:Part #: 113101353BCO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 144863711
This is a full carpet kit.
Application:
These handles go on the inside of the front doors to open them.
