Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Vent Window Latch Plate, Chrome, fits both sides, Each
Vent Window Latch Plate, Chrome, fits both sides, Each
Bus (Type 2): 55-67
No customer reviews for the moment.
Part #: 1129040
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 6857650
Billet Deluxe Whip Antenna Mount for 1.5" Tubing
Application:Part #: 311105401BRC
Most people don't realize that these are one of the most important parts in the motor.
Application:Part #: 6615103C
Rear Rotor for Disc brake setup, Dual Pattern 5/130mm and 5/4.75", Short Spline
Application:Part #: 111885661
Rear Seat Release Tube (2)
Application:Part #: F1129601
These are the glues and oils we use..
Application:Part #: 070109345
These are the seals that go around the push rod tubes.
Application:Part #: 111863701
This is a full carpet kit.
Application:Part #: 241817126
Skylight Inner Structure Only, No Glass Included, 4 windows, Right
Application:Part #: 111857233
Radio Block Off Plate
Application:Part #: 1601099
These are studs and nuts for different types of wheels.
Application:Part #: 1805055
This tray mounts behind the rear seat.
Application:Part #: 113701173
This bracket is part of the torsion housing.
Application:Part #: 113609001
Backing Plate Bolt Kit
Application:Part #: 111301207
Nose Cone Bushing, Front or Rear, Early
Application:Part #: 133415801
These two rods go from the center tie rod on a Bug, to the spindles, making the car turn.
Application: