Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Carpet kit.
Carpet kit. The part numbers are just the basic numbers so you will need to tell us what color you want and what kind of material. There are three styles to choose from; loop, cut pile, and square weave. Brought to you proudly by TMI. Note: Buy a can of 3M spray adheasive. Pay attention when using this. Once it is stuck that's it. **Please call for current prices**Prices vary. The price you see is just the most common.
No customer reviews for the moment.
Part #: 113953163A
Chrome Housing for Turn Signals, Each
Application:Part #: 1863620BS
Center Console Basket (Small)
Application:Part #: 221881405
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 311405641B
These are the inner bearing seals on the drums or rotors.
Application:Part #: 211611313J
The reservoir holds the brake fluid for the brake master cylinder.
Application:Part #: 1129306075
These are some of the most common jets used.
Application:Part #: 1101476BWG
Wolfgang Billet Valve Covers There are a few companys making billet valve covers and I have used a few of them and liked them. But we decided to make our own with a few differences.
Application:Part #: 1117102
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: N138211
These are the gaskets used between the intake manifold and the cylinder head.
Application:Part #: 211903183
This is the bell shaped spacer that hold the outer half of the generator pulley on.
Application:Part #: 113845121AAM
This seal goes around the front window.
Application:Part #: 113721221
Brake Pedal Push-Rod Lock Tab
Application:Part #: T1905200
This puller removes the distributor drive shaft.
Application:Part #: 211611483
This valve in the wheel cylinder allows you to bleed the brakes.
Application:Part #: 1941003
H4 Headlight bulb , 12 volts
Application:Part #: 131863404
This is a full carpet kit.
Application:
Carpet kit.