Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the glues and oils we use..
These are the glues and oils we use.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 111885371
This is the padding that sits on top of the springs of the seat.
Application:Part #: N125381
Cotter Pin, Steering Box to Pitman Arm
Application:Part #: T1501332
If you plan to take off your CV joints you will need this socket.
Application:Part #: 021131617F
This is a smog device.
Application:Part #: N185101
These fittings fit on the front end so you can pump grease in the front suspension..
Application:Part #: 213837626
Vent wing seals on the front doors keep out the elements.
Application:Part #: N177222
These are some of the fuses and bulbs that you might need.
Application:Part #: 211813175B
Rear apron (valance).
Application:Part #: 1601099
These are studs and nuts for different types of wheels.
Application:Part #: 113885583
These are the parts needed to hold the back of the rear seat up.
Application:Part #: 113251163F
Tail pipes route the exhaust out of the back of the stock muffler..
Application:Part #: 021109345A
These are the seals that go around the push rod tubes.
Application:Part #: 1847101LASY
Hinge Assembly Bug Safari Left
Application:Part #: 113798074
This is the pin and the spring needed on the accelerator pedal.
Application:Part #: 1903532
This is just a cover that fits around a 30amp generator to give it that chrome look.
Application:Part #: 211012900
A broken one can give bad reception and a coat hanger isn't much better.
Application:
These are the glues and oils we use..