Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
It caps the hole you are aiming at while pouring oil over everything else.
It caps the hole you are aiming at while pouring oil over everything else. Used ones are fine as long as the gasket is good.
Bug (Type 1): 56-74
Bus (Type 2): 56-71
Ghia: 56-74
Thing (Type 5): 73-74
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1115485CH
A stock cap that has been chromed for looks..
Application:Part #: 113115611
No, this isn't that distant cousin.
Application:Part #: 043115531A
Oil Filler with Cap
Application:Part #: 1117007
This is the high-temp/pressure hose used for routing oil to coolers and filters.
Application:Part #: JC22660
Jaycee Street Oil Filter Bracket, Black
Application:Part #: 1115457BL
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Blue
Application:Part #: 113115451D
Oil Filler with Tube
Application:Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1117102ALF
These fittings are used for the stainless steel hose.
Application:Part #: 021117151A
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1115453
This stock oil filler and cap has been chromed.
Application:Part #: 1117011
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
Application:Part #: 1115110
These thermostats turn your electric fan on automatically.
Application:Part #: N110062
Some of the more common nuts you might need..
Application:Part #: 6115349
If you built your motor out of a type 3 case, you probably notice that once you got it all together you're missing a dipstick tube.
Application:Part #: 1115107AFF
26mm Oil pump for dual relief case with a flat cam. For full flowed motors only.
Application:
It caps the hole you are aiming at while pouring oil over everything else.