Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a smog device.
This is a smog device. We suggest you wait until a smog station says you need a filter before buying one due to the expense.
Bug (Type 1): 74
Ghia: 74
Thing: 74
No customer reviews for the moment.
Part #: 111945235B
Taillight Bezel Seals (Set of 2)
Application:Part #: 113611829A
Master Cylinder to Bulkhead Spacer
Application:Part #: 113701421
Seat Rails, 1 Set per Seat, 2 sets per car
Application:Part #: 1119025BK
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 113407361E
These joints are located in the ends of the control arms.
Application:Part #: 111701259A
This bushing wraps around the front shift rod.
Application:Part #: 211259283
Accelerator Push rod to lever, Spring, each 2 Required
Application:Part #: 1823032
This is a dress-up kit for the front and rear air intakes on your bug..
Application:Part #: 6881410ABL
These seats are better than the fiberglass, but still no where near as good as beard seats.
Application:Part #: 141853912
Karmann Ghia Dash Emblem Script
Application:Part #: 141837240
This seal goes between the handle and the body.
Application:Part #: 1101130
A case saver is an insert that repairs worn or stripped head stud holes in a case.
Application:Part #: 311198169B92
Piston Ring Set 92mm
Application:Part #: 1601103A
Screw in Wheel Studs M14-1.5 commonly found in 5x130 applications
Application:Part #: 361845341BAM
Back Quarter Windows Non Pop-Out Seals, American, Left
Application:Part #: 211711629N
Heater cables open the flaps in the heater boxes allowing heat into the car.
Application:
This is a smog device.