Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the lenses that go over the front turn signal bulb holders.
These are the lenses that go over the front turn signal bulb holders. Don't over tighten the screws or the lens will crack.
Bug (Type 1): 54-57
Bus (Type 2): 55-61
No customer reviews for the moment.
Part #: 2301241
This steel ball replaces the factory plastic one in Bus trannies 1968-1979.
Application:Part #: 151845521ECL
This seal is for the rear window. This is for a CONVERTIBLE ONLY.
Application:Part #: B1090110
Idiot's Guide.
Application:Part #: 1405311A
Do you have a lowered beam now? They should have come with a kidney belt and a mouth guard.
Application:Part #: 211721335E
This cable pulls the arm that releases the clutch.
Application:Part #: 113255292AAL
The heater hose goes from the fan shroud to the heater boxes.
Application:Part #: 1105720
Chevy Rod Bearings STD
Application:Part #: 1109651
We have had good luck with stock keepers on single springs.
Application:Part #: 1109618
Dual Spring Shims, .015" 8 piece
Application:Part #: 211805034
Body repair pieces for front panels.
Application:Part #: 211405681
This plate goes between the two nuts on each of the front spindles.
Application:Part #: 1845101KWG
Bug Safari Glass ONLY
Application:Part #: 6801105
Chromoly Seat Mounting Tab, radiused for 1 1/2" tubing
Application:Part #: 6513029
This boss comes in real handy when making upper shock mounts or putting on rear lower shock mounts in IRS cars..
Application:
These are the lenses that go over the front turn signal bulb holders.
