Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the lenses that go over the front turn signal bulb holders. Don't over tighten the screws or the lens will crack.
Bus (Type 2): 73-79
No customer reviews for the moment.
Part #: 111821021D
These new front fenders are not as thick as the original German fenders.
Application:Part #: 2251008
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 113837433
This is the channel that the front door windows roll up into.
Application:Part #: 6615103A
Rear Rotor for Disc brake setup, 4x130 bolt pattern, 14x1.5mm threads
Application:Part #: 021198009B
This kit contains most of the seals and gaskets necessary to rebuild an engine.
Application:Part #: 211401273
These are the rubber snubbers that are in between the front torsion bar arms.
Application:Part #: JC44470
Jaycee Billet IDA Stacks, Blue, Each
Application:Part #: 211698001E
Metal Brake Line kit
Application:Part #: 261813163
This is what the battery sits on.
Application:Part #: 186361111
These ride on the tunnel from the shifter forward.
Application:Part #: 6129650476BK
Outerwear pre-filters feature a patented; Micro Mesh nylon filtration system that stops sand and dirt before it gets to your air cleaner element.
Application:Part #: 113707391WW
Bumper Support
Application:Part #: 141871034
This is the outer skin on your convertible.
Application:Part #: 1611750D
These stainless steel braided flex lines don't swell like the original rubber hoses and they make the undercarriage look a lot nicer.
Application:Part #: 111809022BX
Lower Wheel House, Right
Application:Part #: 2301150
This is a bolt on kit that reduces torsional stress felt at the front of the nose cone mount and rotational stress on the bell housing mounts.
Application:Bus (Type 2); 56-67
