Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Replacement fan
This is the same fan as comes in the mesa cooler kits. If you want to add a fan to your cooler or your fan went bad this is the replacement. Keep in mind the fan does not come with the mounting hardware.
No customer reviews for the moment.
Part #: 1117107
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117101ALF
These fittings are used for the stainless steel hose.
Application:Part #: 1115141
This oil pump cover comes with a threaded boss.
Application:Part #: 113117321
Hoover Bit, Oil Cooler Sealing Frame
Application:Part #: 1115458
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 111115487
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 113115475
It's possible to put a generator on an alternator stand but not the other way around.
Application:Part #: 1117102ALF
These fittings are used for the stainless steel hose.
Application:Part #: N138171
Oil pressure relief gasket
Application:Part #: 1115456
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 1117113
This adapter replaces the stock oil cooler with two hoses to reroute the oil to an external oil cooler.
Application:Part #: N115244
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 111115107AK
VW flat cam, 21mm, 8mm Stud Oil Pump
Application:Part #: 113117303
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1117103
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: JC21020
Jaycee Mag-Plate, 6 Bolt, Black
Application:
Replacement fan
