Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This is a list of the most common bolts used on a car..
This is a list of the most common bolts used on a car.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 151871351B
These strips screw to the top.
Application:Part #: 111813161
Engine Bay Shelf, Left
Application:Part #: 113847131BWH
This is the welt that goes around the rear popout windows.
Application:Part #: 6251008
Systems are designed for max horsepower and to handle the punishment of off-road competition.
Application:Part #: 111801045K
The heater channel carries heat form the heater boxes to the front of the car.
Application:Part #: 117877335
These are all of the parts that we can get our hands on for metal sunroof bugs.
Application:Part #: 1198162A
These rings are cast iron.
Application:Part #: 6823564
There are two types of hold downs, rubber and steel.
Application:Part #: N154011
These nuts and washers hold the heads on.
Application:Part #: 113129031K
This is what delivers gas and air to the engine.
Application:Part #: JC21910
Jaycee Tapered Ring Compressor 92mm
Application:Part #: 1301049
These straps are a good idea if you have a car with a big engine.The rear strap keeps the bell housing from twisting and the front strap keeps the nose of the transmission from breaking the front mount.We highly recomend that you use these in conjunction with the urethane transmission mounts.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 1101461KIT
This kit has the correct studs for a dual port engine to hold the heads on. 10mm
Application:Part #: 151847322A
Quarter Window Hinge, Right, Convertibles only Bug (Type 1): 65-79
Application:Part #: 113251263B
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application: