Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the front strip that goes down the front hood.
This is the front strip that goes down the front hood. To remove the old strap, use a good stiff putty knife with some duct tape on one side to keep from scratching the paint. Slide the knife under the strip and work it up to a clip and gently pry up. To install the new one just pop into place.
Bug (Type 1): 73-79
No customer reviews for the moment.
Part #: 111821707BWH
This is the beading that goes between the fender and the body.
Application:Part #: 113853535C
This is the chrome trim that went on the front and sides of the Bug to dress it up.
Application:Part #: 151853325C
These chrome moldings for American style seals go around the windows and are just for looks.
Application:Part #: 113853641A
This is the little grill that is on the front fenders of 67 and earlier Bugs.
Application:Part #: 111821707BTQ
This is the beading that goes between the fender and the body.
Application:Part #: 1823021
This is a dress-up kit for the front and rear air intakes on your bug..
Application:Part #: 131853535C
This is the chrome trim that went on the front and sides of the Bug to dress it up.
Application:Part #: 113853505CSL
Front Hood Molding
Application:Part #: 111821509BGR
The running boards go between the fenders on each side of the car.
Application:Part #: 111821510BGR
The running boards go between the fenders on each side of the car.
Application:Part #: 111821715AOE
This is the beading that goes between the fender and the body.
Application:Part #: 113853615
These are three little plastic pieces that push into the front hood to hold the emblem in place.
Application:Part #: 113853559B
These are the clips that hold the various chrome moldings on.
Application:Part #: 151853355C
These chrome moldings for American style seals go around the windows and are just for looks.
Application:Part #: 113853555D
These are the correct trim moldings for your running boards.
Application:Part #: 1827026
These are the aluminum trim pieces that go over the deck lid louvers..
Application:
This is the front strip that goes down the front hood.
