Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The door lock mechanism holds the door closed.
The door lock mechanism holds the door closed. To remove the old mechanism you'll need to take the door panel off and basically gut the inside. Peel the door rubber from the door jam and remove the Phillips screw(s) that hold the handle in. Look for the three Phillips screws that hold the mechanism in and remove them. Now remove the clip that holds the inside handle rod to the mechanism. Next, take out the window (yeah, I know it's a pain). Then look at the metal channel that the felt sits in. Peel the felt up a little at the bottom and you will see a 10mm headed bolt that has to be removed. Remove the bolt and push up on the channel and it will come out. At this point, fish the lock mechanism out. To install the new mechanism, go in the reverse order.
Bug (Type 1): 60-64
Race/Off-Road: 60-64
No customer reviews for the moment.
Part #: 01052
These are the parts found in the distributor.
Application:Part #: 111801044
Outer Rocker Panel Right
Application:Part #: 311201219A
This hose goes from the filler neck to the tank.
Application:Part #: 261881370
This is the padding that sits on top of the springs of the seat.
Application:Part #: 1117106ALF
Hose End 120 Degree No. 8
Application:Part #: 111831449
These grommets are for the tail light wires to go through.
Application:Part #: 211809187
Side Strengthening Panel 1.9 meters long (74.8")
Application:Part #: 113837640AHD
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
Application:Part #: 1107433
Not our favorite type of piston pin keeps.
Application:Part #: 211301289A
Nose Cone Boot
Application:Part #: 113867503
This is the vinyl covering for the inside roof and sides of the Bug.
Application:Part #: 211201075L
Fuel Tank For Carbureted Applications only. At this point in time we can not get this tank and we are using the 211201075M fuel injection take and just plugging off the return line.
Application:Part #: 131601154
Beauty rings fit under the hubcap to improve the look of your stock rim.
Application:Part #: 111801045K
The heater channel carries heat form the heater boxes to the front of the car.
Application:Part #: 111831421J
These pins are in the door hinges.
Application:
The door lock mechanism holds the door closed.
