Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N109052
Screws for replacement pop out window frames. These screws are for joining the two Popout frame halves together
Application:Bus (Type 2): 50-67
No customer reviews for the moment.
Part #: 111511245
Spring Plate Bushings
Application:Part #: 1119031
Replacement fan
Application:Part #: N125481
This pin is a must because it holds the axle nut on.
Application:Part #: 263707386
Rear Bumper Overrider Bow, Right
Application:Part #: 211711647C
Center Defrost Cable, Controls dash defrost operation
Application:Part #: 6707301CH
These bumpers are made for Baja Bugs.
Application:Part #: 6251005
These systems work well with a single carb set up as they have provisions for the heat riser.
Application:Part #: 113105701
These are the shells that go in the rods and ride on the crank.
Application:Part #: 1129201301
48mm/51mm IDA Carb Float Only
Application:Part #: 6881403
These are the real deal.
Application:Part #: 113953173
Turn Signal Assembly screws (Set of 4)
Application:Part #: 141564914SR
These slick steering wheels have black hand-stitched, leather-grained vinyl grips with black or silver anodized aluminum spokes with machined racing holes..
Application:Part #: N200071
Screw Hole Plug, Front Door, 4 required
Application:Part #: 211843425C
Lower front Bearing for Sliding Cargo Door
Application: