Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Choke Cable w/Sleeve and knurled nut
Choke Cable w/Sleeve and knurled nut
Bug (Type 1): 52-61
Bus (Type 2): 61-67
Ghia: 55-61
Offroad: 52-61
No customer reviews for the moment.
Part #: 151871182CBK
Quarter Hinge, Cover, Black Plastic Convertibles only
Application:Part #: 1405371WG
These are new lowered ball joints pressed into reconditioned arms. They are sold on an exchange basis. If you would like to order these before sending your old arms in, please add part number 311405371WGC to your order. That is the core charge. Once you send back your old arms we will refund that amount, providing your arms are good.
Application:Part #: N102461
This is a list of the most common bolts used on a car..
Application:Part #: 1251006
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 1117106ALM
These fittings are used for the stainless steel hose.
Application:Part #: NGK D7EA
This Spark plug is only used for Racing or Competition vehicles due to the size of the Spark Plug; Dimensions Below Thread Pitch: 12mm x 1.25mm, Thread Length: 19mm (3/4") Verify that the Thread Pitch and length is compatible with your heads if you have any questions call and ask prior to ordering.
Application:Part #: 113827903
This bracket holds the license plate to the car.
Application:Part #: 1105253BK
This is a crank pulley for an upright motor.
Application:Part #: 117867502
This is the vinyl covering for the inside roof and sides of the Bug.
Application:Part #: N185112
These fittings fit on the front end so you can pump grease in the front suspension..
Application:Part #: 111998162C
The wiper arms are connected to these shafts.
Application:Part #: 111117021ERB
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 113105277
These pins hold the flywheel in place on the crankshaft.
Application:Part #: 151871045C
This boot keeps the wind from ripping up your top when it is down.
Application:Part #: 133971022
The electrical harness runs everything on the car.
Application:Part #: 1107433
Not our favorite type of piston pin keeps.
Application:
Choke Cable w/Sleeve and knurled nut