Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Body Pad (2), Lower, Body to Front Beam
Body Pad (2), Lower, Body to Front Beam
Bug (Type 1): 10/52-79
Offroad/Race: 10/52-79
No customer reviews for the moment.
Part #: 1837235BIL
Billet Door Handle Buffer Rings, Set of 4
Application:Part #: 141857551BBK
These are the visors you pull down to keep the sun out of your eyes.
Application:Part #: 1115467
This is a breather box that will give excess "blow by" a place to go.
Application:Part #: 261827500
Engine lid Mechanism Hardware Kit
Application:Part #: 113863112
These are the interior panels.
Application:Part #: 1903032CH
These are the three pieces of tin that go on the back of the generator or alternator.
Application:Part #: 211863114
These are the interior panels.
Application:Part #: 211798003A
Rear Bumper Bolt Kit
Application:Part #: 088141165A
Clutch Throw Out Bearing for Vanagon
Application:Part #: 111301289B
This boot goes around the nose cone to seal up the hole where it comes through the pan.
Application:Part #: 2711102
The aftermarket shifters listed here, shorten the shift pattern considerably.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 1101448
This is a shim that is used between the head and barrel.
Application:Part #: 1711144BR
These knobs come step threaded so they'll fit all stock 7,10, or 12mm shifters.
Application:Part #: 113311123A
This is the main culprit of a noisy transmission.
Application:
Body Pad (2), Lower, Body to Front Beam