Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Locking Glove Box Door Latch
Locking Glove Box Door Latch includes 2 keys
Bug (Type 1): 68-79 Super: 71-72
Bus (Type 2): 72-79
Ghia: 68-74
Offroad: 68-79
No customer reviews for the moment.
Part #: 111903221S
Replacement Bearings for Serpentine System
Application:Part #: 1109338
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
Application:Part #: 241837225A
Interior Chrome Front Door Handle
Application:Part #: 151801131B
These are the replacement rails for convertibles.
Application:Part #: 1115610
Chrome dipsticks come in different lengths and styles..
Application:Part #: 1198163
These rings are cast iron.
Application:Part #: 3129040
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 1251262C
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Application:Part #: 1129505011
These are some of the most common jets used.
Application:Part #: 211721629
Pivot Pin for Accelerator Pedal Hinge
Application:Part #: 111711717D
Heater cables open the flaps in the heater boxes allowing heat into the car.
Application:Part #: 111105235A
These are the shims that set the endplay of the distributor drive gear.
Application:Part #: 113821021P
These new front fenders are not as thick as the original German fenders.
Application:Part #: 1109310
These lifters are made by Engle and have a small hole in the end of them that allows oil to be pumped onto the cam lobe and lifter face.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 16010597A
Raider Anthracite, 5x205, 17x7"
Application:
Locking Glove Box Door Latch
