Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Body Molding Kit
Body Molding Kit
Bug (Type 1): 1967
No customer reviews for the moment.
Part #: 113425021
This little shock goes from the center pin arm or pitman arm to the front axle beam or frame.
Application:Part #: 2707291
This is a nice repro of the original front bumper step.
Application:Part #: 171867500
This is the vinyl covering for the inside roof and sides of the Bug.
Application:Part #: 111821707BRR
This is the beading that goes between the fender and the body.
Application:Part #: 113611301B
The reservoir holds the brake fluid for the brake master cylinder.
Application:Part #: 211845102R
To fix the rusted out area of the front window.
Application:Part #: 211703131
This support goes from the main frame out to the inner rocker.
Application:Part #: 211843792BGR
Right Side, Sliding Door, Seal, GERMAN
Application:Part #: 111209139
Sealing Ring, Seals Copper Screen to Fuel Valve
Application:Part #: 111881360
Sisel Padding, 28" x 6' per sheet.
Application:Part #: 113407075BR
This is the front brake rotor that the pads ride against on disc brake front ends.
Application:Part #: 113853585B
These are the clips that hold the various chrome moldings on.
Application:Part #: 3251000
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 143823531BWH
This the cable you pull to release the front hood.
Application:
Body Molding Kit