Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The sending unit registers the fuel level on the gauge. There were two types, mechanical for Bugs up to 1967 and electrical for Bugs 1968 and on. There is no such thing as 6v or 12v electrical sending units, as they have a floating ground. Before replacing the electrical unit, take the wire off of it and hold it to ground (a bolt or metal on the body). CAUTION: WHENEVER WORKING AROUND LIVE WIRES AND GAS BE VERY, VERY CAREFUL. Turn the key on. If the gauge goes to full, the sending unit is bad. If it doesn't, the gauge and or the vibrator is bad.
Bus (Type 2): 80-87
No customer reviews for the moment.
Part #: 111201557B
Gas Cap Gasket, 100mm
Application:Part #: 71016
This filter goes in line with the fuel line, keeping dirt or rust out of the carburetor.
Application:Part #: 211919051A
The sending unit registers the fuel level on the gauge.
Application:Part #: 111209113A
Fuel Tap Rebuild Kit
Application:Part #: 211201075L
Fuel Tank For Carbureted Applications only. At this point in time we can not get this tank and we are using the 211201075M fuel injection take and just plugging off the return line.
Application:Part #: 211919051
The sending unit registers the fuel level on the gauge.
Application:Part #: N203761
Tank Breather Hose 10mm ID, per foot
Application:Part #: 211255463
Fuel Filler Hose, Hose Clamp
Application:Part #: 271919051B
The sending unit registers the fuel level on the gauge. 7 1/2" long
Application:Part #: N203631
Vent Hose, Filler to T, 14mm x 215mm
Application:Part #: 211201557E
Gas Cap Gasket, 70mm
Application:Part #: 261201651
Fuel Tank Mounting Strap, Set of 2
Application:Part #: 251201551C
The most common reason, for replacing a cap is forgetting to put it back on at the gas station.
Application:Part #: 111209139
Sealing Ring, Seals Copper Screen to Fuel Valve
Application:Part #: 113919133
The sending unit registers the fuel level on the gauge.
Application: