Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
92mm Pistons & Cylinders Thick Wall set with a 82mm Stroke CHINA
92mm Pistons & Cylinders Thick Wall set with a 82mm Stroke CHINA
Bug (Type 1): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Offroad/Race: 1600
No customer reviews for the moment.
Part #: 141971235A
This is the strap that goes from the negative post of the battery to the pan of the car.
Application:Part #: 6857650
Billet Deluxe Whip Antenna Mount for 1.5" Tubing
Application:Part #: 113119585
These seals go over the stock H pipes where they come through the front pulley tin.
Application:Part #: 141881377
This is the padding that sits on top of the springs of the seat.
Application:Part #: 6801121
These tabs are used for mounting just about anything to tubing..
Application:Part #: 211615107CO
Front calipers hold the brake pads that stop the rotor, which in turn stops your vehicle.
Application:Part #: 1105258
This is a stock, zinc-plated crankshaft pulley bolt that has a 3/8" drive hole broached into the center.
Application:Part #: 113101353BRB
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld). Due to a shortage of cores we will need your Cylinder head Cores before sending any Rebuilt heads.
Application:Part #: JC22950
Jaycee Billet Full Flow Pump Cover w/ -8 O-ring Fitting, Black
Application:Part #: 30048
This little box tells the Alternator what to do.
Application:Part #: 111201557C
80mm Gas Cap Gasket
Application:Part #: 1129617
This air cleaner is a sealed unit; the top and bottom do not come off, but they're washable.
Application:Part #: 113412329B
SB Strut Upper Mount w/ Bearing
Application:Part #: 1109451
This style of adjusting screw has a ball with a flat side on the end.
Application:Part #: 111105233
This gear matches up with the brass gear that is on the crank.
Application:
92mm Pistons & Cylinders Thick Wall set with a 82mm Stroke CHINA