Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Urethane Front Transmission mount with Hardware
Urethane Front Transmission mount with Hardware, Late model 3-bolt Nose Cone for Early Chassis
Bug (Type 1): 61-72
Ghia: 61-72
Offroad/Race: 61-72
No customer reviews for the moment.
Part #: 111857229A
Mesh Grill with Fuel Gauge
Application:Part #: 115875335B
Sunroof Front Mechanism Inner Sliding Blocks (Pair)
Application:Part #: 113255355M
This is the hose that goes from the body to the engine.
Application:Part #: 113201075AD
These are new Brazilian tanks.
Application:Part #: 02039
These are the parts found in the distributor.
Application:Part #: 113863113
These are the interior panels.
Application:Part #: 1401300B
If your stock bushings are worn out or you have an aluminum beam, we offer the following urethane bushings and replacements..
Application:Part #: 1615100D
This kit allows you to bolt disc brakes onto your Bug king and link pin or ball joint front end.
Application:Part #: 111119270B
This is a hub that is keyed onto the generator or alternator to mount the fan.
Application:Part #: 261829551
These new hinges replace your old worn out or frozen hinges.
Application:Part #: 1301049
These straps are a good idea if you have a car with a big engine.The rear strap keeps the bell housing from twisting and the front strap keeps the nose of the transmission from breaking the front mount.We highly recomend that you use these in conjunction with the urethane transmission mounts.
Application:Part #: 115875395A
Sunroof Mechanism Female Screw
Application:Part #: 823419831
This is the boot for the rack and pinion unit.
Application:Part #: 111881364
This is the padding that sits on top of the springs of the seat.
Application:Part #: 6401023
These clamps are made to go around your front axle beam and are used when building rail cars or stiffening up the front head of a baja Bug..
Application:Part #: 113415061C
If you have a lot of play in the steering don't just assume the steering box is bad.
Application:
Urethane Front Transmission mount with Hardware