Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Not our favorite type of piston pin keeps.
Not our favorite type of piston pin keeps. There good for a friday saturday car. The reason we dont like them is after many miles they tend polish the sides of the barrel. Rings will not seat on a polished surface. Sold in sets of 8.
Bug (Type 1): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 1101484
This is like a stock gasket except it is made out of rubber instead of cork.
Application:Part #: N14402140
Some of the most common studs you might need. Stud 8mm x 40mm
Application:Part #: 113101355ACO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 113101481F
This gasket goes between the valve cover and the head.
Application:Part #: 1109604
Valve seats are used in the big valve heads.
Application:Part #: 1101382
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 315198163A
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 1109602
Valve seats are used in the big valve heads.
Application:Part #: 1101374
40 HP Barrel Shims .040 (4)
Application:Part #: 1101396
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101472
If you like clip on valve covers these are the best that we have seen.
Application:Part #: 111198057A
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers.
Application:Part #: 311198069MF
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers. MAHLE FORGED
Application:Part #: 1101346
36 HP Barrel Shims .060 (4)
Application:Part #: 1198094B
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 1198159B
These rings are cast iron.
Application:
Not our favorite type of piston pin keeps.
