Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Solid Trans Mid Mount
Solid Trans Mid Mount, made by Wolfgang International
Offroad/Race: All
No customer reviews for the moment.
Part #: 1601150
These are the most popular five lug mags wheels.
Application:Part #: 025115629A
Oil Dipstick Tube
Application:Part #: 111837298A
Striker Plate Screw (Long), 3 required
Application:Part #: 1501205SW
Now you can dial in your suspension in an instant.
Application:Part #: 1119026CH
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 211721383
These seals go around the shafts of the clutch and brake pedal to seal the holes in the floor.
Application:Part #: 211953513D
This switch tells the flasher which way to send the current.
Application:Part #: 1129512
Empi Hex Bar Linkage for 48/51 EPC and 48 IDA (works with and without Air Cleaners)
Application:Part #: 111707111
Front Bumper Bar, Bare Steel
Application:Part #: 04004
These are the parts found in the distributor.
Application:Part #: 6721356C
Slave Cylinder Trans Bracket Billet for Type 2 Transmissions
Application:Part #: 113609237A
These shoes or linings are in the rear drums and are new, so no exchange.
Application:Part #: 251837911B
Front door seals keep out the wind, rain, dirt and noise.
Application:Part #: 221883861A
When you mount the middle seat, you'll want the rubber mat down and the bolts in the key slots first.
Application:Part #: 211703120AX
This is where you would put in the stock jack to jack up the bus.
Application:Part #: 111837581J
On Bugs up to 1967 and on Buses up to 1963 you will need to push back the small plastic bezel.
Application:
Solid Trans Mid Mount
